multigas2

GC™ MultiGas

Product Description

Take control of the air you breathe

The GC MultiGas features two particle filters that work in tandem to provide an overall reduction of more than 99% of all particles (0.3 microns and larger) in the air. First, a HyperHEPA Pre-Filter eliminates micro- and nano-particles such as allergens, smoke, bacteria and viruses. New Edition technology, including improved pleat-spacing patterns and other advances, extends the life of the H11 HyperHEPA pre-filter by 20%. The HyperHEPA pre-filter also helps extend the life of the gas-phase media by preventing the gas-control cartridges from clogging with particulates. The GC MultiGas HyperHEPA pre-filter is proven and certified to eliminate 95% of all particles down to 0.003 microns, the smallest particles that exist. This includes the entire range of ultrafine particles, the smallest and most harmful particles in the air. Additionally, each GC MultiGas gas-phase cartridge is wrapped with a micro-charged post-filter sleeve that eliminates particles released in the activated carbon adsorption and alumina pellet chemisorption media.
The GC MultiGas combines the best filter media in the industry with superior design to provide an unequaled level of protection against gases, odors, chemicals, and particles.

320-Degree air exhaust

Most air cleaners return filtered air into the room through a small, noisy outlet. The IQAir GC MultiGas was designed with 320-degree air delivery to supply more air in more directions without drafts or noise. Other systems create annoying air drafts and restrict the ability of the system to produce fresh, clean air that can fill the room when you need it. The IQAir GC MultiGas boosts system efficiency by evenly returning cleaned air through a large 320-degree EvenFlow™ vented diffuser. And the wide dispersion pattern allows the GC MultiGas to produce an astounding air delivery rate with very little noise.

The purest air possible

The IQAir GC MultiGas air purifier is designed to clean the full spectrum of airborne pollutants with the very best filtration technology available at each of four stages. Air is drawn into the GC MultiGas through the bottom of the system by a powerful IQAir fan, then sequentially cleaned in a step-by-step process that delivers the purest air possible. In addition, IQAir’s unique no-leakage design prevents air from escaping back into the room without being drawn through the GC MultiGas filters. The four filtration stages include:

1.Micro- and nano-particle filtration: The first stage of filtration features a powerful HyperHEPA® pre-filter that eliminates micro- and nano-particles such as allergens, smoke, bacteria and viruses.
2.Cartridge-based activated carbon adsorption: Eliminates volatile organic compounds (VOC), which are responsible for odors.
3.Cartridge-based chemisorption: Destroys harmful chemicals, such as formaldehyde, by an oxidation process inside a chemically active alumina pellet.
4.Micro-charged filtration: Eliminates activated carbon and chemisorption abrasion particles through a charged fiber structure.


1

100% Healthy technology

Our HyperHEPA filtration technology is the safest, healthiest and most effective way to clean the air. The GC MultiGas particle filters work in tandem to remove more than 99 percent of all airborne particles (0.3 microns and larger) without using unsafe or unproven technologies such as ozone generation, ionization, ultraviolet radiation. And the micro-charged filtration post-filter in the GC MultiGas system eliminates any particles that might be released from our carbon and alumina gas, odor and chemical filtration stage
Superior long-term performance and low cost operation
• Extra-long filter life due to large capacity
• Lower running costs due to fewer filter changes.
• Low electricity consumption due to capacitor switching.
• Individual filter stages. Allows replacement of exactly those filters which are used up.

Exceptional control features
• Automatic timer allows programming to suit the user’s individual needs (e.g. night time or office hours only).
• Intelligent filter life monitor calculates when it is time to replace filters, taking actual use and actual fan speed and preset pollution levels into account.
• LEDs on the control panel signal which filters need replacement.
• Selection of 6 fan speed settings with top air delivery of 350 m3/hour (with all filters installed).
• Remote control and mobility pro casters.
Top quality
• 5 year warranty
• Tough ABS housing construction (out-gassed)
• Powerful centrifugal fan certified for non-stop use –Free- flow rate: 1200 m3/hour
• Patented housing design
• Patented filter design
• 100% Swiss made
Unique availability
A wide range of IQAir accessories allow customization of the IQair GC series to fit individual needs:
Wall-mounting bracket (VMFtm), pressure ducting adaptors (InFlowtm, VM InFlowtm, OutFlowtm), coarse dust pre-filter (pf40)
Powerful performance
Only uses effective and approved filtration technologies (absolutely no ozone generation)
Up to 21% more clean air - The New Edition features the most powerful fan ever used in a residential room air purifier. That power translates into even better air cleaning results. The new three-dimensionally optimized design now uses state-of-the-art aerodynamics to convert energy into more air and less noise. By improving further on the HyperHEPA® pre-filter pleating design, we were able to increase loading capacity up to 21%. This translates into higher airflow while increasing filter life. This higher efficiency also saves you money by lowering filter replacement costs.
The best media for superior filtration – The four disposable gas-phase filter cartridges of the GC MultiGas feature 12 lbs. (5.4 kg.) of the highest-grade activated carbon from bituminous coal, not the cheap coconut-shell carbon others use. IQAir also does not use zeolite, another less effective and less expensive filtration medium. Alumina pellets impregnated with potassium permanganate remove formaldehyde from the air. The cylindrical shape of the GC MultiGas cartridges allows for optimal contact between the air and the filtration media, while offering very low air restriction. Meanwhile, HyperHEPA post filters wrap each cylinder, preventing any media dust from being released while further improving overall system efficiency.
Post-filter sleeve set- 4 electrostatically charged fiber sleeves (p260) for the post- filtration of fine particles.
FILERATION EFFICENC OF UP TO 99% FOR PARTICLES OF 0.3 micron and larger.


Downloads Related To a Product

Specifications
Comparison
For further details